logo
Home
about us
Company Profile
factory tour
quality control
products

Single Sphere Rubber Expansion Joint

Double Sphere Rubber Expansion Joint

Fully Sealed Rubber Expansion Joint

Custom Rubber Expansion Joint

Rubber Duckbill Check Valve

Dismantling Joint

Bellow Expansion Joint

Flexible Metal Braided Hose

Pipe Expansion Compensators

Gibault Joint

Flange Adaptor

Pipe Repair Clamp

Butterfly Valve

Flanged Gate Valve
video
events
news
FAQ
contact us
quote
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
bahasa indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
home
about us
products

Single Sphere Rubber Expansion Joint

Double Sphere Rubber Expansion Joint

Fully Sealed Rubber Expansion Joint

Custom Rubber Expansion Joint

Rubber Duckbill Check Valve

Dismantling Joint

Bellow Expansion Joint

Flexible Metal Braided Hose

Pipe Expansion Compensators

Gibault Joint

Flange Adaptor

Pipe Repair Clamp

Butterfly Valve

Flanged Gate Valve
video
events
news
FAQ
contact us
quote
banner

News Details
Home > News >

Company news about The reason why the rubber joint ball is suddenly sucked flat during operation.

Events

News
Contact Us
Miss. Kelly
annehnlhgd@163.com
86-188-3895-8009
Contact Now

The reason why the rubber joint ball is suddenly sucked flat during operation.

2024-12-10

The main reasons for the dent of the ball of the single ball rubber joint are as follows:
      1. Poor material quality: If the material quality of the rubber joint is not good, it is easy to cause the ball to dent.
      2. Improper installation: If there is too much force during the installation process, or the installation method is incorrect, it will also cause the ball to dent.
      3. Excessive use time: After the rubber joint is used for a long time, it may appear aging, cracking and other phenomena, which will lead to dents.
      4. Excessive negative pressure inside the pipeline: In a vacuum or negative pressure environment, the rubber joint may be flattened and dented.

 

 

 

 

Methods for dealing with the depression of the ball of a single ball rubber joint include:
      1. Replace the rubber joint: If the dent is serious and cannot be restored to its original state, it is recommended to replace the rubber joint with a new one.
      2. Optional negative pressure rubber joints: In the case of vacuum in the pipeline, choose negative pressure resistant rubber joints.

 

 

 

 

Preventive measures and routine maintenance recommendations:
      1. Choose high-quality materials: Make sure to use high-quality rubber materials to avoid dents caused by material quality problems.
      2. Correct installation: Pay attention to the distribution and uniformity during installation to avoid excessive local force.
      3. Regular inspection: Regularly check the status of the rubber joint, find and deal with dents and other problems in time.
      4. Avoid prolonged exposure to sunlight: Try to avoid exposing rubber joints to sunlight for long periods of time to prolong their service life.

 

 

 

 

latest company news about The reason why the rubber joint ball is suddenly sucked flat during operation. 0

 

banner
News Details
Home > News >

Company news about-The reason why the rubber joint ball is suddenly sucked flat during operation.

Events

News

Cases

The reason why the rubber joint ball is suddenly sucked flat during operation.

2024-12-10

The main reasons for the dent of the ball of the single ball rubber joint are as follows:
      1. Poor material quality: If the material quality of the rubber joint is not good, it is easy to cause the ball to dent.
      2. Improper installation: If there is too much force during the installation process, or the installation method is incorrect, it will also cause the ball to dent.
      3. Excessive use time: After the rubber joint is used for a long time, it may appear aging, cracking and other phenomena, which will lead to dents.
      4. Excessive negative pressure inside the pipeline: In a vacuum or negative pressure environment, the rubber joint may be flattened and dented.

 

 

 

 

Methods for dealing with the depression of the ball of a single ball rubber joint include:
      1. Replace the rubber joint: If the dent is serious and cannot be restored to its original state, it is recommended to replace the rubber joint with a new one.
      2. Optional negative pressure rubber joints: In the case of vacuum in the pipeline, choose negative pressure resistant rubber joints.

 

 

 

 

Preventive measures and routine maintenance recommendations:
      1. Choose high-quality materials: Make sure to use high-quality rubber materials to avoid dents caused by material quality problems.
      2. Correct installation: Pay attention to the distribution and uniformity during installation to avoid excessive local force.
      3. Regular inspection: Regularly check the status of the rubber joint, find and deal with dents and other problems in time.
      4. Avoid prolonged exposure to sunlight: Try to avoid exposing rubber joints to sunlight for long periods of time to prolong their service life.

 

 

 

 

latest company news about The reason why the rubber joint ball is suddenly sucked flat during operation. 0

 

Quick link
Home About Us products Video News Contact Us
Quick Contact

Address

Pipeline Industrial Park, Gongyi City, Henan Province, China

Tel

86-188-3895-8009

Our Newsletter
Subscribe to our newsletter for discounts and more.
Privacy Policy |  Sitemap  | China Good Quality Single Sphere Rubber Expansion Joint Supplier. Copyright © 2025 Henan Lianghe Pipeline Equipment Co.,Ltd . All Rights Reserved.